Material DensityCubic Centimeters to Kilograms

Cubic Centimeters to Kilograms for Plastic (PET)

Snapshot

For Plastic (PET), 1 Cubic Centimeter equals about 0.00137 Kilograms. Conversion Encyclopedia keeps one material-density basis on this page so the calculator, common values, and reverse page stay aligned.

Material basis: Plastic (PET) at 1,370 kg/m^3.
Example: For 0.1 Cubic Centimeters of Plastic (PET), the result is 0.000137 Kilograms.
Use the reverse page if you need the opposite direction with the same basis.

Use the interactive calculator below for custom values and the common-value table for quick checks.

Interactive conversion

Converter Calculator

0.00137 Kilograms (Plastic (PET))

Switch

Machine access

Available to apps and AI agents

Cubic Centimeters to Kilograms for Plastic (PET) can be requested through Conversion Encyclopedia's structured interfaces by software and compatible AI agents. The plastic-pet identifier tells the conversion engine which material record to use for the same calculation shown by the calculator.

Machine-readable identifiers

Conversion family: material-density
Source unit: cubic_centimeter
Target unit: kilogram
Material: plastic-pet

The JSON API and OpenAPI specification use the identifiers to reach the conversion engine. WebMCP lets compatible AI agents request the same calculation.

Example API request and response

POST /api/v1/convert

Request

{
  "family": "material-density",
  "value": 1,
  "from": "cubic_centimeter",
  "to": "kilogram",
  "material": "plastic-pet"
}

Essential response

{
  "ok": true,
  "conversion": {
    "family": "material-density",
    "value": 1,
    "from": "cubic_centimeter",
    "to": "kilogram",
    "result": {
      "raw": 0.00137,
      "display": "0.00137"
    },
    "canonicalPath": "/material-density/cubic-centimeters-to-kilograms/plastic-pet/"
  }
}

Full API documentation

Explanation

Cubic Centimeters of Plastic (PET) convert to kilograms using one fixed density basis of 1370 kg/m^3. The same density model is used in the calculator, common values, and mirror route so weight, mass, and volume checks stay aligned.

Typical PET polymer density.

Material & Method

Material used: Plastic (PET). Method basis: density fixed at 1,370 kg/m^3 for every calculation on this page.
Applied relationship: 1 Cubic Centimeter (volume) = 0.00137 Kilograms (mass) using the same material density basis.
Reference rule: snapshot, calculator, and common values table use the same material basis throughout the page.

Common Conversion Values

Cubic Centimeters (Plastic (PET))	Kilograms (Plastic (PET))
0.1	0.000137
0.25	0.000343
0.5	0.000685
1	0.00137
2	0.00274
5	0.00685
10	0.0137
25	0.03425
50	0.0685
100	0.137

Methodology

Plastic (PET) density and calculation basis

Plastic (PET) is represented in this table by a fixed reference density of 1370 kg/m^3, equivalent to 1.37 g/cm^3. Typical PET polymer density.

At this fixed reference, 1 liter of Plastic (PET) corresponds to 1.37 kg, while 1 kg corresponds to 0.729927 liters. Its table density is 37.4% higher than the 997 kg/m^3 water reference used in this dataset.

Among the 4 fixed table records labeled Polymers, the nearest density to Plastic (PET) is Plastic (PVC) at 1380 kg/m^3: an absolute difference of 10 kg/m^3 (0.7% relative to Plastic (PET)). 2 records have a lower fixed density and 1 have a higher one. The observed range in this labeled group is Plastic (HDPE) at 950 kg/m^3 to Plastic (PVC) at 1380 kg/m^3. This is a numerical comparison, not a claim that the materials are interchangeable.

For this direction, mass is calculated as volume multiplied by density after normalizing the units to cubic meters and kilograms. The resulting page multiplier is 0.00137 kg per cm^3.

The fixed value supports repeatable calculations but is not a batch, grade, supplier, or laboratory specification. Use a measured or certified density when those conditions control the result.

Questions & answers

Frequently Asked Questions

How much kg is 1 cm^3 of Plastic (PET)?

1 cm^3 of Plastic (PET) equals 0.00137 kg with the fixed density basis used here.

What density is used for Plastic (PET)?

Plastic (PET) uses a fixed density of 1370 kg/m^3.

Is there a reverse page with the same density basis?

Yes. Use the mirror page (Kilograms to Cubic Centimeters for Plastic (PET)) to convert in the opposite direction with the same fixed density basis.