Cubic Centimeters to Kilograms for Nickel
Snapshot
For Nickel, 1 Cubic Centimeter equals about 0.0089 Kilograms. Conversion Encyclopedia keeps one material-density basis on this page so the calculator, common values, and reverse page stay aligned.
- Material basis: Nickel at 8,900 kg/m^3.
- Example: For 0.1 Cubic Centimeters of Nickel, the result is 0.00089 Kilograms.
- Use the reverse page if you need the opposite direction with the same basis.
Use the interactive calculator below for custom values and the common-value table for quick checks.
Interactive conversion
Converter Calculator
0.0089 Kilograms (Nickel)
SwitchMachine access
Available to apps and AI agents
Cubic Centimeters to Kilograms for Nickel can be requested through Conversion Encyclopedia's structured interfaces by software and compatible AI agents. The nickel identifier tells the conversion engine which material record to use for the same calculation shown by the calculator.
Machine-readable identifiers
- Conversion family
material-density- Source unit
cubic_centimeter- Target unit
kilogram- Material
nickel
The JSON API and OpenAPI specification use the identifiers to reach the conversion engine. WebMCP lets compatible AI agents request the same calculation.
Example API request and response
POST /api/v1/convertRequest
{
"family": "material-density",
"value": 1,
"from": "cubic_centimeter",
"to": "kilogram",
"material": "nickel"
}Essential response
{
"ok": true,
"conversion": {
"family": "material-density",
"value": 1,
"from": "cubic_centimeter",
"to": "kilogram",
"result": {
"raw": 0.0089,
"display": "0.0089"
},
"canonicalPath": "/material-density/cubic-centimeters-to-kilograms/nickel/"
}
}Explanation
Cubic Centimeters of Nickel convert to kilograms using one fixed density basis of 8900 kg/m^3. The same density model is used in the calculator, common values, and mirror route so weight, mass, and volume checks stay aligned.
Standard engineering density for nickel.
Common Conversion Values
| Cubic Centimeters (Nickel) | Kilograms (Nickel) |
|---|---|
| 0.1 | 0.00089 |
| 0.25 | 0.002225 |
| 0.5 | 0.00445 |
| 1 | 0.0089 |
| 2 | 0.0178 |
| 5 | 0.0445 |
| 10 | 0.089 |
| 25 | 0.2225 |
| 50 | 0.445 |
| 100 | 0.89 |
Methodology
Nickel density and calculation basis
Nickel is represented in this table by a fixed reference density of 8900 kg/m^3, equivalent to 8.9 g/cm^3. Standard engineering density for nickel.
At this fixed reference, 1 liter of Nickel corresponds to 8.9 kg, while 1 kg corresponds to 0.11236 liters. Its table density is 792.7% higher than the 997 kg/m^3 water reference used in this dataset.
Among the 13 fixed table records labeled Metals, the nearest density to Nickel is Copper at 8960 kg/m^3: an absolute difference of 60 kg/m^3 (0.7% relative to Nickel). 8 records have a lower fixed density and 4 have a higher one. The observed range in this labeled group is Aluminum at 2700 kg/m^3 to Gold at 19320 kg/m^3. This is a numerical comparison, not a claim that the materials are interchangeable.
For this direction, mass is calculated as volume multiplied by density after normalizing the units to cubic meters and kilograms. The resulting page multiplier is 0.0089 kg per cm^3.
The fixed value supports repeatable calculations but is not a batch, grade, supplier, or laboratory specification. Use a measured or certified density when those conditions control the result.
Questions & answers
Frequently Asked Questions
How much kg is 1 cm^3 of Nickel?
1 cm^3 of Nickel equals 0.0089 kg with the fixed density basis used here.
What density is used for Nickel?
Nickel uses a fixed density of 8900 kg/m^3.
Is there a reverse page with the same density basis?
Yes. Use the mirror page (Kilograms to Cubic Centimeters for Nickel) to convert in the opposite direction with the same fixed density basis.