Cubic Centimeters to Grams for Rubber (Solid)
Snapshot
For Rubber (Solid), 1 Cubic Centimeter equals about 1.1 Grams.
- Material basis: Rubber (Solid) at 1,100 kg/m^3.
- Example: For 0.1 Cubic Centimeters of Rubber (Solid), the result is 0.11 Grams.
Interactive conversion
Converter Calculator
Decimals: 1.5 or 1,5. Fractions: 1/2. Scientific notation: 1e3. Write 1000 without grouping separators.
1.1 Grams (Rubber (Solid))
SwitchAPI and AI agent access
Cubic Centimeters to Grams for Rubber (Solid). Material: rubber-solid.
Machine-readable identifiers
- Conversion family
material-density- Source unit
cubic_centimeter- Target unit
gram- Material
rubber-solid
Use these identifiers in the API request. Sources and model limits also apply to software clients.
Example API request and response
POST /api/v1/convertRequest
{
"family": "material-density",
"value": 1,
"from": "cubic_centimeter",
"to": "gram",
"material": "rubber-solid"
}Essential response
{
"ok": true,
"conversion": {
"family": "material-density",
"value": 1,
"from": "cubic_centimeter",
"to": "gram",
"result": {
"raw": 1.1,
"display": "1.1"
},
"canonicalPath": "/material-density/cubic-centimeters-to-grams/rubber-solid/"
}
}Explanation
Cubic Centimeters of Rubber (Solid) convert to grams using one fixed density basis of 1100 kg/m^3. Match temperature, composition and material grade to the stated reference conditions.
Representative solid rubber density.
Common Conversion Values
| Cubic Centimeters (Rubber (Solid)) | Grams (Rubber (Solid)) |
|---|---|
| 0.1 | 0.11 |
| 1/4 | 0.275 |
| 1/2 | 0.55 |
| 1 | 1.1 |
| 2 | 2.2 |
| 5 | 5.5 |
| 10 | 11 |
| 25 | 27.5 |
| 50 | 55 |
| 100 | 110 |
Methodology
Rubber (Solid) density and calculation basis
Evidence status: needs-review.
Rubber density depends on elastomer formulation and fillers.
grade: E0603-70 black EPDM/EPR compound
method: ASTM D297
Source basis: Parker, E0603-70 EPDM compound data sheet. Physical properties: specific gravity. https://www.parker.com/content/dam/Parker-com/Literature/O-Ring-Division-Literature/e0603.pdf Applicability: context-only.
Identify formulation and a defined density convention.
Specific-gravity reference water/temperature not supplied; no mass-density conversion made.
For this direction, mass is calculated as volume multiplied by density after normalizing the units to cubic meters and kilograms. The resulting page multiplier is 1.1 g per cm^3.
Use a measured density for a specific batch, grade or supplier; the table value is a reference, not a product specification.