Cubic Centimeters to Grams for Kerosene
Snapshot
For Kerosene, 1 Cubic Centimeter equals about 0.81 Grams.
- Material basis: Kerosene at 810 kg/m^3.
- Example: For 0.1 Cubic Centimeters of Kerosene, the result is 0.081 Grams.
Interactive conversion
Converter Calculator
Decimals: 1.5 or 1,5. Fractions: 1/2. Scientific notation: 1e3. Write 1000 without grouping separators.
0.81 Grams (Kerosene)
SwitchAPI and AI agent access
Cubic Centimeters to Grams for Kerosene. Material: kerosene.
Machine-readable identifiers
- Conversion family
material-density- Source unit
cubic_centimeter- Target unit
gram- Material
kerosene
Use these identifiers in the API request. Sources and model limits also apply to software clients.
Example API request and response
POST /api/v1/convertRequest
{
"family": "material-density",
"value": 1,
"from": "cubic_centimeter",
"to": "gram",
"material": "kerosene"
}Essential response
{
"ok": true,
"conversion": {
"family": "material-density",
"value": 1,
"from": "cubic_centimeter",
"to": "gram",
"result": {
"raw": 0.81,
"display": "0.81"
},
"canonicalPath": "/material-density/cubic-centimeters-to-grams/kerosene/"
}
}Explanation
Cubic Centimeters of Kerosene convert to grams using one fixed density basis of 810 kg/m^3. Match temperature, composition and material grade to the stated reference conditions.
Representative kerosene density near room temperature.
Common Conversion Values
| Cubic Centimeters (Kerosene) | Grams (Kerosene) |
|---|---|
| 0.1 | 0.081 |
| 1/4 | 0.2025 |
| 1/2 | 0.405 |
| 1 | 0.81 |
| 2 | 1.62 |
| 5 | 4.05 |
| 10 | 8.1 |
| 25 | 20.25 |
| 50 | 40.5 |
| 100 | 81 |
Methodology
Kerosene density and calculation basis
Evidence status: needs-review.
Kerosene density depends on fuel specification and temperature.
temperature: 20 °C
grade: Illuminating kerosene, TotalEnergies Kenya
Source basis: TotalEnergies Kenya, Illuminating kerosene specification. Illuminating kerosene specification: density. https://totalenergies.ke/corporate-solutions/fuels/kerosene Applicability: conditional-comparison.
Establish grade and a representative density, not only a maximum.
Only an upper limit; does not establish a representative value.
For this direction, mass is calculated as volume multiplied by density after normalizing the units to cubic meters and kilograms. The resulting page multiplier is 0.81 g per cm^3.
Use a measured density for a specific batch, grade or supplier; the table value is a reference, not a product specification.