Marine & NauticalMeters per Second to Feet per Second

Meters per Second to Feet per Second

Snapshot

1 Meter per Second equals 3.28084 Feet per Second. Conversion Encyclopedia uses the same fixed conversion basis across the calculator, common values, and reverse page for this page.

Reference basis: This result uses fixed vessel-speed definitions anchored to knots and the active marine route.
Example: For 5 Meters per Second, the result equals 16.404199 Feet per Second.
Use the reverse page if you need the opposite direction with the same basis.

Use the interactive calculator below for custom values and the common-value table for quick checks.

Interactive conversion

Converter Calculator

3.28084 Feet per Second (ft/s)

Switch

Machine access

Available to apps and AI agents

Meters per Second to Feet per Second can be requested through Conversion Encyclopedia's structured interfaces by software and compatible AI agents. The identifiers below select the same calculation as the calculator.

Machine-readable identifiers

Conversion family: marine
Source unit: meters_per_second
Target unit: feet_per_second

The JSON API and OpenAPI specification use the identifiers to reach the conversion engine. WebMCP lets compatible AI agents request the same calculation.

Example API request and response

POST /api/v1/convert

Request

{
  "family": "marine",
  "value": 1,
  "from": "meters_per_second",
  "to": "feet_per_second"
}

Essential response

{
  "ok": true,
  "conversion": {
    "family": "marine",
    "value": 1,
    "from": "meters_per_second",
    "to": "feet_per_second",
    "result": {
      "raw": 3.28083989501,
      "display": "3.28084"
    },
    "canonicalPath": "/marine/meters-per-second-to-feet-per-second/"
  }
}

Full API documentation

Explanation

Formula: Feet per Second = Meter per Second × 3.28084. Why: marine speed units are normalized through knots, so the route follows one deterministic vessel-speed basis before applying the target unit.

Meters per Second (m/s): an SI speed unit used in engineering, fluid, and motion calculations.

Feet per Second (ft/s): an imperial speed unit used in engineering and flow-style velocity references.

This route is useful when restating vessel speed between knots and engineering or land-speed units for navigation, instrumentation, and performance reporting.

This conversion is purely multiplicative because both units reduce through one fixed marine reference basis for the active family, with no offset.

Method & Marine Basis

Method basis: fixed vessel-speed definitions anchored to knots for marine reporting and instrumentation.
Applied factor: 1 Meter per Second = 3.28084 Feet per Second.
Consistency rule: calculator output and common-value rows use the same fixed marine constants in both directions.

Common Conversion Values

Meter per Second (m/s)	Feet per Second (ft/s)
1	3.28084
5	16.404199
10	32.808399
15	49.212598
20	65.616798
30	98.425197
40	131.233596

Questions & answers

Frequently Asked Questions

How many feet per second are in 1 meter per second?

The fixed factor gives 1 meter per second = 3.28083989501 feet per second.

What is the reverse conversion for Meters per Second to Feet per Second?

Use the Feet per Second to Meters per Second page to reverse the same vessel-speed relationship for knots, current, and performance checks.

Can I use decimal meters per second values?

Yes. Decimal meters per second values are supported for vessel speed, current, and instrumentation checks.