Microteslas to Milliteslas
Snapshot
1 Microtesla equals 0.001 Milliteslas. Conversion Encyclopedia uses the same fixed conversion basis across the calculator, common values, and reverse page for this page.
- Reference basis: This conversion uses exact tesla-based magnetic flux density definitions.
- Example: For 0.001 Microteslas, the result equals 0.000001 Milliteslas.
- Use the reverse page if you need the opposite direction with the same basis.
Use the interactive calculator below for custom values and the common-value table for quick checks.
Converter Calculator
0.001 Milliteslas (mT)
SwitchExplanation
Formula: Milliteslas = Microteslas × 0.001. Why: both units are tesla-based SI magnetic-flux-density scales, so the route is exact powers-of-ten scaling through one tesla reference.
Microteslas (uT): a very small tesla-based unit widely used for geomagnetic fields, environmental measurements, and low-field sensing.
Milliteslas (mT): a magnetic-flux-density unit equal to one thousandth of a tesla, common in magnets, sensors, and laboratory field measurements.
This route is useful when restating SI magnetic-field values between tesla, millitesla, and microtesla scales so instrument readings, magnet specs, and engineering calculations stay on the intended basis.
This conversion is purely multiplicative because both units reduce through teslas using fixed SI and CGS magnetic-field definitions with no offset.
Common Conversion Values
| Microteslas (uT) | Milliteslas (mT) |
|---|---|
| 0.001 | 0.000001 |
| 0.01 | 0.00001 |
| 0.1 | 0.0001 |
| 1 | 0.001 |
| 10 | 0.01 |
| 100 | 0.1 |
| 1,000 | 1 |
Frequently Asked Questions
What formula is used for Microteslas to Milliteslas?
The factor is derived from exact tesla normalization using fixed SI and CGS relationships.
How can I convert back from Milliteslas to Microteslas?
Use the mirror Milliteslas to Microteslas route; it applies the inverse relationship for the opposite direction with the same assumptions.
Can I use decimal values for Microteslas to Milliteslas?
Yes. Decimal inputs are supported for Microteslas to Milliteslas, and the mirror direction keeps inverse assumptions aligned.