Foot-candles to Kilolux

Snapshot

1 Foot-candle equals 0.010764 Kilolux. Conversion Encyclopedia uses the same fixed conversion basis across the calculator, common values, and reverse page for this page.

Reference basis: This conversion uses exact lux-based illuminance definitions.
Example: For 10 Foot-candles, the result equals 0.107639 Kilolux.
Use the reverse page if you need the opposite direction with the same basis.

Use the interactive calculator below for custom values and the common-value table for quick checks.

Converter Calculator

0.010764 Kilolux (klx)

Switch

Explanation

Formula: Kilolux = Foot-candles × 0.010764. Why: this is a cross-system illuminance conversion. The calculator normalizes the value through lux, then applies the exact target-unit constant for consistent lighting and exposure work.

Foot-candles (fc): an imperial illuminance unit based on lumens per square foot, common in lighting design, building standards, and photographic exposure references.

Kilolux (klx): an illuminance unit equal to 1,000 lux, used for bright lighting conditions, exposure references, and high-illumination environments.

This route is useful when translating illuminance values between lux-based and foot-candle scales for architectural lighting, workplace standards, and exposure measurements.

This conversion is purely multiplicative because both units reduce through lux using fixed illuminance definitions with no offset.

Method & Reference

Method basis: exact conversion formula shown in Snapshot.
Applied factor: 1 Foot-candle = 0.010764 Kilolux (using exact lux-based illuminance definitions).
Consistency rule: calculator output and table values use the same constants and rounding policy.

Common Conversion Values

Foot-candles (fc)	Kilolux (klx)
1	0.010764
10	0.107639
50	0.538196
100	1.076391
300	3.229173
500	5.381955
1,000	10.76391
10,000	107.639104

Frequently Asked Questions

What is 1 foot-candle in kilolux?

1 Foot-candle equals 0.010764 Kilolux on this page.

Does this Foot-candles to Kilolux page use the fixed lux equivalent for foot-candles?

Yes. Foot-candle routes use one fixed lux equivalent on this page, so architectural lighting and exposure values stay aligned across the direct answer, calculator, and table.

When would I convert foot-candles to kilolux?

This route is useful when translating illuminance values between lux-based and foot-candle scales for architectural lighting, workplace standards, and exposure measurements.

How do I reverse Foot-candles to Kilolux?

Use the mirror Kilolux to Foot-candles route; it applies the inverse relationship with the same illuminance assumptions.