Camera Focal EquivalenceHorizontal Angle of View Degrees to Focal Length Mm At Aps C Sony Fuji 23 5mm

Horizontal angle of view (degrees) to Focal length (mm) for APS-C Sony/Fuji 23.5mm

Snapshot

On APS-C Sony/Fuji 23.5mm, a 50 horizontal angle of view needs about a 25.197956 mm lens. Conversion Encyclopedia keeps the same sensor profile across the calculator, common values, and reverse page for this page.

  • Sensor profile: APS-C Sony/Fuji 23.5mm (23.5 mm width, crop factor 1.5).
  • Example: To reach 14 Horizontal angle of view (degrees), you need 95.696071 Focal length (mm) on APS-C Sony/Fuji 23.5mm.
  • Use the reverse page if you need the opposite direction with the same basis.

Use the interactive calculator below for custom values and the common-value table for quick checks.

Interactive conversion

Converter Calculator

1,346.416639 Focal length (mm)

Switch

Machine access

Available to apps and AI agents

Horizontal angle of view (degrees) to Focal length (mm) for APS-C Sony/Fuji 23.5mm can be requested through Conversion Encyclopedia's structured interfaces by software and compatible AI agents. The aps-c-sony-fuji-23-5mm sensor profile tells the conversion engine which camera sensor setup belongs to the calculation.

Machine-readable identifiers

Conversion family
camera-focal-equivalence
Source unit
horizontal_angle_of_view_degree
Target unit
focal_length_mm
Sensor profile
aps-c-sony-fuji-23-5mm

The JSON API and OpenAPI specification use the identifiers to reach the conversion engine. WebMCP lets compatible AI agents request the same calculation.

Example API request and response

POST /api/v1/convert

Request

{
  "family": "camera-focal-equivalence",
  "value": 1,
  "from": "horizontal_angle_of_view_degree",
  "to": "focal_length_mm",
  "parameters": {
    "sensorProfile": "aps-c-sony-fuji-23-5mm"
  }
}

Essential response

{
  "ok": true,
  "conversion": {
    "family": "camera-focal-equivalence",
    "value": 1,
    "from": "horizontal_angle_of_view_degree",
    "to": "focal_length_mm",
    "result": {
      "raw": 1346.416639019388,
      "display": "1,346.416639"
    },
    "canonicalPath": "/camera-focal-equivalence/horizontal-angle-of-view-degrees-to-focal-length-mm-at-aps-c-sony-fuji-23-5mm/"
  }
}
Full API documentation

Explanation

Formula: focal_mm = 23.5 / (2 x tan(HFOV/2)). Why: this page keeps APS-C Sony/Fuji 23.5mm fixed, so crop factor and sensor width stay explicit for every calculation.

APS-C Sony/Fuji 23.5mm: a sensor profile with crop factor 1.5 and sensor width (horizontal) 23.5 mm, used as the fixed framing basis for this page.

Horizontal angle of view (degrees): a camera-equivalence quantity in this family that depends on the selected crop model.

Focal length (mm): a camera-equivalence quantity in this family that depends on the selected crop model.

This route is useful when you know the target horizontal framing angle and need the focal length required on APS-C Sony/Fuji 23.5mm.

This page is sensor-profile dependent rather than universal because camera equivalence changes with sensor geometry (APS-C Sony/Fuji 23.5mm).

Method & Sensor Profile

  • Sensor basis: APS-C Sony/Fuji 23.5mm profile with crop factor 1.5 and sensor width 23.5 mm.
  • Profile reference: focal-length and aperture equivalence use the same crop model, while angle-of-view routes use the same fixed sensor width geometry.
  • Consistency rule: forward and reverse pages keep the same sensor profile; only the formula direction changes.

Common Conversion Values

Horizontal angle of view (degrees)Focal length (mm)
14 95.696071
24 55.279404
28 47.126676
35 37.266239
50 25.197956
70 16.780739
85 12.822875
135 4.867009
200 -2.071842

Questions & answers

Frequently Asked Questions

Which sensor assumptions are fixed for horizontal angle of view (degrees) to focal length mm?

Horizontal angle of view (degrees) to focal length mm is fixed to APS-C Sony/Fuji 23.5mm, crop factor 1.5, sensor width 23.5 mm.

How do I reverse deg to mm for APS-C Sony/Fuji 23.5mm?

Use the opposite-direction page for APS-C Sony/Fuji 23.5mm to convert focal length (mm) back to horizontal angle of view (degrees) with the same sensor assumptions.

Can horizontal angle of view (degrees) to focal length mm replace full lens-design simulation?

No. Horizontal angle of view (degrees) to focal length mm provides framing and geometry approximations, not full optical-model behavior.