Audio File SizeMegabytes to Minutes At 48khz 24bit Mono

MB to minutes for 48kHz / 24-bit mono PCM Audio

Snapshot

At 48kHz / 24-bit mono PCM, 250 MB stores about 28.94 minutes of audio. Conversion Encyclopedia uses the same fixed conversion basis across the calculator, common values, and reverse page for this page.

Reference basis: This result uses the fixed 48khz / 24-bit mono pcm audio PCM profile to turn storage budget back into recording time from 144,000 bytes/s.
Example: For 25 MB, the 48kHz / 24-bit mono PCM Audio PCM estimate gives about 2.89 minutes of recording time.
Use the reverse page if you need the opposite direction with the same basis.

Use the interactive calculator below for custom values and the common-value table for quick checks.

Interactive conversion

Converter Calculator

28.94 minutes

Switch

Machine access

Available to apps and AI agents

MB to minutes for 48kHz / 24-bit mono PCM Audio can be requested through Conversion Encyclopedia's structured interfaces by software and compatible AI agents. The 48khz-24bit-mono audio profile tells the conversion engine which audio settings belong to the calculation.

Machine-readable identifiers

Conversion family: audio-file-size
Source unit: megabyte
Target unit: minute
Audio profile: 48khz-24bit-mono

The JSON API and OpenAPI specification use the identifiers to reach the conversion engine. WebMCP lets compatible AI agents request the same calculation.

Example API request and response

POST /api/v1/convert

Request

{
  "family": "audio-file-size",
  "value": 250,
  "from": "megabyte",
  "to": "minute",
  "parameters": {
    "profile": "48khz-24bit-mono"
  }
}

Essential response

{
  "ok": true,
  "conversion": {
    "family": "audio-file-size",
    "value": 250,
    "from": "megabyte",
    "to": "minute",
    "result": {
      "raw": 28.93518518518519,
      "display": "28.94"
    },
    "canonicalPath": "/audio-file-size/megabytes-to-minutes-at-48khz-24bit-mono/"
  }
}

Full API documentation

Explanation

Formula: minutes = MB / (0.144 x 60) (PCM 48kHz / 24-bit mono). Why: this page fixes the 48khz / 24-bit mono pcm audio PCM profile so duration-to-size calculations stay tied to one explicit sample-rate, bit-depth, and channel layout.

File size (MB): decimal megabytes of storage, where 1 MB = 1,000,000 bytes.

Duration (minutes): elapsed audio time in minutes.

This route is useful when estimating how much recording time fits into a storage budget under the fixed 48khz / 24-bit mono pcm audio PCM profile.

This conversion is profile-based rather than universal: uncompressed PCM file size depends on sample rate, bit depth, and channel count, so mirror pages should keep the same recording profile to remain comparable.

Method & PCM Profile

Method basis: fixed PCM byte-rate estimate inverted to recover recording time from storage size at 0.144 MB/s.
Profile reference: 48kHz / 24-bit mono PCM Audio (144,000 bytes/s; 0.144 MB/s PCM basis).
Consistency rule: snapshot, calculator, FAQ, and common-value rows all use the same fixed PCM profile and byte-rate estimate for this route.

Common Conversion Values

File size (MB)	Duration (minutes)
25	2.89
50	5.79
100	11.57
250	28.94
500	57.87
1,000	115.74

Questions & answers

Frequently Asked Questions

Which PCM settings are fixed for mb to minutes?

MB to minutes uses 48000 Hz, 24-bit depth, and 1 channels for this profile.

How is the 8.64 MB per minute factor calculated for 48kHz / 24-bit mono?

Bytes per second = 48000 × (24 / 8) × 1 = 144000 bytes/s. Using decimal MB (1 MB = 1,000,000 bytes), that is 0.144 MB/s or 8.64 MB/min.

How do I reverse MB to min for 48kHz / 24-bit mono?

Use the opposite route for 48kHz / 24-bit mono to convert duration (minutes) back to file size (mb) with the same PCM assumptions.

Where does the 0.144 MB/s factor come from?

It is the raw PCM byte rate converted to decimal megabytes: 144000 bytes/s ÷ 1,000,000 = 0.144 MB/s.

Can mb to minutes support storage budgeting?

Yes. MB to minutes is suitable for first-pass recording and archive estimates in PCM workflows.