Apparel SizeHat Size

US Fitted to Inner Diameter (mm) Hat Size for Loose Fit

Snapshot

7.3 US Fitted equals 184 Inner Diameter (mm). Conversion Encyclopedia uses the same fixed conversion basis across the calculator, common values, and reverse page for this page.

Reference basis: This result uses the selected mm mapping as the profile basis.
Example: For 6.8 US Fitted, the mm mapping returns 171 Inner Diameter (mm) under the same fit assumptions.
Use the reverse page if you need the opposite direction with the same basis.

Use the interactive calculator below for custom values and the common-value table for quick checks.

Interactive conversion

Converter Calculator

184 Inner Diameter (mm) value

Switch

Machine access

Available to apps and AI agents

US Fitted to Inner Diameter (mm) Hat Size for Loose Fit can be requested through Conversion Encyclopedia's structured interfaces by software and compatible AI agents. The loose-fit identifier specifies the fit profile used by the size conversion.

Machine-readable identifiers

Conversion family: hat-size
Source unit: us-fitted
Target unit: diameter-millimeters
Fit: loose-fit

The JSON API and OpenAPI specification use the identifiers to reach the conversion engine. WebMCP lets compatible AI agents request the same calculation.

Example API request and response

POST /api/v1/convert

Request

{
  "family": "hat-size",
  "value": 7.25,
  "from": "us-fitted",
  "to": "diameter-millimeters",
  "parameters": {
    "fit": "loose-fit"
  }
}

Essential response

{
  "ok": true,
  "conversion": {
    "family": "hat-size",
    "value": 7.25,
    "from": "us-fitted",
    "to": "diameter-millimeters",
    "result": {
      "raw": 184.15,
      "display": "184"
    },
    "canonicalPath": "/apparel-size/hat-size/us-fitted-to-diameter-millimeters-for-loose-fit/"
  }
}

Full API documentation

Explanation

US Fitted converts to Inner Diameter (mm) by normalizing to head circumference in millimeters, then mapping to the destination system. Fit profile fixed: Loose Fit.

From US Fitted to Inner Diameter (mm), results depend on the selected mm fit mapping and stay consistent with that mapping across table rows and calculator input.

Keep the same fit profile in both directions to avoid mixing size mappings that use different apparel allowances.

Method & Size Mapping

Model basis: output depends on the selected fit profile and follows the same fit mapping in both directions.
Profile reference: mm.
Consistency rule: calculator output and table values keep the same fit profile in both directions.

Common Conversion Values

US Fitted value	Inner Diameter (mm) value
6.8	171
7	178
7.3	184
7.5	191
7.8	197

Questions & answers

Frequently Asked Questions

Is the reverse hat-size direction available?

Yes. The mirror page Inner Diameter (mm) to US Fitted (Loose Fit) uses the inverse path.

Which hat fit profile is used?

Loose Fit.

How is US Fitted to Inner Diameter (mm) calculated?

The converter applies the formula defined for US Fitted to Inner Diameter (mm), then renders rounded output for the direct answer and common-value rows.