AccelerationFeet per Second Squared to Gals

Feet per Second Squared to Gals

Snapshot

1 Foot per Second Squared equals 30.48 Gals. Conversion Encyclopedia uses the same fixed conversion basis across the calculator, common values, and reverse page for this page.

Reference basis: This conversion uses fixed meters-per-second-squared-based acceleration definitions.
Example: For 0.01 Feet per Second Squared, the result equals 0.3048 Gals.
Use the reverse page if you need the opposite direction with the same basis.

Use the interactive calculator below for custom values and the common-value table for quick checks.

Interactive conversion

Converter Calculator

30.48 Gals (Gal)

Switch

Machine access

Available to apps and AI agents

Feet per Second Squared to Gals can be requested through Conversion Encyclopedia's structured interfaces by software and compatible AI agents. The identifiers below select the same calculation as the calculator.

Machine-readable identifiers

Conversion family: acceleration
Source unit: feet_per_second_squared
Target unit: gals

The JSON API and OpenAPI specification use the identifiers to reach the conversion engine. WebMCP lets compatible AI agents request the same calculation.

Example API request and response

POST /api/v1/convert

Request

{
  "family": "acceleration",
  "value": 1,
  "from": "feet_per_second_squared",
  "to": "gals"
}

Essential response

{
  "ok": true,
  "conversion": {
    "family": "acceleration",
    "value": 1,
    "from": "feet_per_second_squared",
    "to": "gals",
    "result": {
      "raw": 30.48,
      "display": "30.48"
    },
    "canonicalPath": "/acceleration/feet-per-second-squared-to-gals/"
  }
}

Full API documentation

Explanation

Formula: Gals = Feet per Second Squared × 30.48. Why: the gal is tied exactly to meters per second squared through the fixed relationship 1 Gal = 0.01 m/s², so the route stays purely multiplicative.

Feet per second squared (ft/s²): an imperial acceleration unit used in mechanical, transportation, and legacy engineering contexts.

Gals (Gal): a CGS acceleration unit equal to exactly 0.01 meters per second squared, common in gravimetry and geophysical work.

This route is useful when comparing gravimetry and geophysics readings in gals against SI or imperial acceleration scales.

This conversion is purely multiplicative because both units reduce through meters per second squared using fixed acceleration definitions with no offset.

Method & Reference

Method basis: exact conversion formula shown in Snapshot.
Applied factor: 1 Foot per Second Squared = 30.48 Gals.
Consistency rule: calculator output and table values use the same constants and rounding policy.

Common Conversion Values

Feet per Second Squared (ft/s²)	Gals (Gal)
0.01	0.3048
0.1	3.048
1	30.48
5	152.4
9.80665	298.906692
10	304.8
32.174	980.66352
100	3,048

Questions & answers

Frequently Asked Questions

What is 1 foot per second squared in gals?

1 Foot per Second Squared equals 30.48 Gals on this page.

Does this Feet per Second Squared to Gals page use 1 Gal = 0.01 m/s²?

Yes. Gal-based routes use the fixed definition 1 Gal = 0.01 m/s² through one meters-per-second-squared normalization path.

When would I convert feet per second squared to gals?